Best Battery Charger & Maintainer SOLAR PL2320 CLORE Automotive
Finally an automotive battery charger and battery maintainer that can also charge batteries that are completely dead. The SOLAR PL2320 by Clore Automotive has been terrific. They are the same company that makes the JNC line of jump start battery packs, which are the industry standard for jump packs. This battery charger also has “power supply mode” so when performing a long repair with the ignition turned on, your battery won’t go dead. It will charge standard lead acid, AGM, and Gel filled batteries, in either 6 or 12 volts along with power supply mode. This charger has been much better than the last two chargers that I purchased from Harbor Freight. Of course neither of the HF chargers still work. lol.
Kittyhok SC2 Pro 100% wireless security camera review and giveaway video. Today I take a look at Kityhok’s new wireless security camera. This new camera features 2K video resolution, color night vision, integrated spotlight, activity zones, PIR detection, AI recognition, 2-way audio, and cloud storage. These cameras are very nice and if I didn’t already own a set of security cameras, these would be going on mu house. The Cameras are very well built, the app is very user friendly and easy to use, and the cameras are VERY easy to get working on your home wireless network. No complicated networking experience or router configuration required.
I will be giving away all four cameras to one viewer. The entry period for the drawing ends when this video reaches 200 likes. The winner will be randomly picked from the comment section of this video.
How to enter the drawing. All three of these items are required to enter:
You must be subscribed to this YouTube channel.
You must click the thumbs up and leave a like for this video.
You must leave a comment in the comment section below.
Rules for this drawing: • The GRAND PRIZE (and only prize) is four (4) Kittyhok 2K security cameras. All four cameras will go to one winner • Entry period is from when this video goes live on YouTube, until it receives 200 likes. Once this video receives 200 likes the entry period will officially be closed • Within a few days of reaching the 200 like threshold, I will make another video of me using a website to randomly pick a winner from the comment section of this video. I will post my email in that video for the winner to contact me. My email can also be found on the “about” page of my YouTube channel • YouTube no longer has a messaging service so the only way you will know if you’ve won is to watch the drawing video. I have no way to contact the winner so please be sure you have notifications turned on by ringing the bell below so you won’t miss the drawing video • Adults 18 and over in the US and Canada are eligible to win. Please do not enter if you do not live in the US or Canada. (for shipping reasons) • I will pay for shipping anywhere inside the US and Canada • If a Canadian citizen is drawn to be the winner, that person will be responsible for any and all import duties and fees the package might be subject to once it arrives in Canada. Those fees will be paid by the winner, not me. • The winner will ONLY be asked for their shipping address, for shipping purposes. That’s it! No financial information will be asked for. None of your information (email address, or shipping address) will be shared with anyone. • The winner will have two weeks to contact me about their prize. Once the two week period is up, if the winner does not contact me, they will forfeit the prize and will no longer be eligible to receive anything from this YouTube channel. The prize will be considered “unclaimed”. • YouTube and/or Google are NOT a sponsor of this drawing giveaway. • This giveaway is a drawing, NOT a contest. A winner will be randomly picked. Winning this drawing requires no special skills. • No purchase necessary. • Void where prohibited. • The four (4) Kittyhok cameras were provided by Kittyhok • If the video does not reach 200 “likes” by 11:59pm (Central time) April 30th, 2022 then the drawing will officially be over, with now winner picked.
This is where I found a hard-to-find vacuum leak on my Ford 4.6 liter 2 valve V8 engine. These engines were put in cars and trucks, the Crown Vic, The F-150, and the Mustang. This is the vapor tube assembly between the EVAP purge valve (AKA, the vapor management valve) and the throttle body. The old tube (hose) was completely rotten and became very porous. I believe air (vacuum) was leaking directly into the engine through the porous walls of the old hose. The new hose is actually a plastic tube and comes with new quick disconnect ends already installed on each end. This was absolutely causing a vacuum leak (Pirate Air) on my vehicle, which I proved to myself with a pinch off pliers. If it happened on my car, it can happen on any other Ford with the similar setup. The new “EVAP Tube Assembly” came directly from Ford and it was fairly cheap. Nice, easy, quick fix. Hope this video helps someone who will eventually find themselves in my shoes trying to find the source of high positive long term fuel trims.
XTOOL D7 vs D8 Comparison. Differences Between These Two Diagnostic Scan Tools
A quick video about the differences between the XTOOL D7 and XTOOL D8 diagnostic scan tools. I did separate review videos about each of these OBDII scanners a while back but there have been many questions about the differences between the two. See the links below for those review videos. Some of the differences pointed out in this video were sent to me by XTOOL, and some of the differences I have discovered myself. This may not be a 100% complete list.
How to make your own power bleeder to bleed ABS brakes on any car.
I show how I made a DIY power pressure brake bleeder to finish bleeding the brakes on a 2008 Ford Crown Victoria. After running the automated bleed process on my OBDII scan tool I still needed to finish manually bleeding the brake lines and finish removing all the air from the brake system. This homemade power bleeder worked absolutely terrific for me with no problems at all. Nice firm pedal, no mushy pedal here! Again, I used this power bleeder ALONG WITH an OBDII scan tool to completely bleed the trapped air out of the ABS module. I have found that I need both (scan tool and power bleeder) to completely remove all air from the brake system. Your mileage may vary, however.
The vehicle that I used this tool to bleed was a 2008 Ford Crown Victoria but this method should work on just about any make/model of vehicle as long as you have the correct master cylinder adapter.
Thanks for watching.
We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.OkNoPrivacy policy
You can revoke your consent any time using the Revoke consent button.Revoke consent
